Ошондай со-тип таҫманан сәскәләр? And how to Create a Dynamic Таҫма Ужасов flower Bow?
You Will Need
|
A modern twist to bow making with our amazing ҡорал өсөн таҫмаһы зачистка , no gift wrapper should be without this. In this project you will learn how to make a fantastic intricately cut bow. |
Step 1:
Cut three stripes of each colour of the ribbon measuring approximately
15cm/6〃 long. You can make this bow with on ribbon colour.
Step 2:
Leave approximately 2cm/1〃 on each side.
Place the first ribbon strip in between the teeth of the ribbon stripper.
Apply even force on the stripper and strip the ribbon
– do not strip the ribbon off the end.
TIP – Gently tug the ribbon in the ribbon shredder to ensure ribbon isn`t shredded
to the end.
Step 3:
Repeat the same of all six strips of ribbon.
Step 4:
Fold the stripped ribbon in half and twist the ribbon at the base. This will
create a beautiful flower effect.
Step 5:
Apply clear tape to the base of the ribbon to create a strong stem.
Apply double-sided tape around the stem and remove the backing.
Step 6: Яртылар тирәһендә, тағы бер киҫәген һалдым һәм таҫма раздевать обкручивать
ике яҡлы скотч. Таҫма ҡулланылған һыуҙы таҙартыу һабаҡ.
Раздевать таҫма менән тамамлау менән ҡала һәм процессы кабатларга
ике яҡлы скотч.
Step 7:
Буй таҫмалар алыуға, яҡынса 15см/6 оҙон〃һәм газ төшөрөү
полоса төҙөү тамамланды нәҙек таҫмалы.
Step 8:
Ике яҡлы скотч һәм тирә-яҡ тулыһынса растрепывать таҫмаһы таҫмаһы беркетелгән йәлп
үтә күренмәле таҫма менән клейка.
Step 9:
Make a small cut at the base of the ribbon stem. Ensure the cut is small,
do not cut too deep and gently pull apart, do not split the ribbon too deep.