What is Ribbon Shredder Flowers? And how to Create a Dynamic Reveni ni Shredder flower Bow?
You Will Need
|
A modern twist to bow making with our amazing ribbon stripping tool, no gift wrapper should be without this. In this project you will learn how to make a fantastic intricately cut bow. |
Step 1:
Cut three stripes of each colour of the ribbon measuring approximately
15cm/6〃 long. You can make this bow with on ribbon colour.
Step 2:
Leave approximately 2cm/1〃 on each side.
Place the first ribbon strip in between the teeth of the ribbon stripper.
Apply even force on the stripper and strip the ribbon
– do not strip the ribbon off the end.
TIP – Gently tug the ribbon in the ribbon shredder to ensure ribbon isn`t shredded
to the end.
Step 3:
Repeat the same of all six strips of ribbon.
Step 4:
Fold the stripped ribbon in half and twist the ribbon at the base. This will
create a beautiful flower effect.
Step 5:
Apply clear tape to the base of the ribbon to create a strong stem.
Apply double-sided tape around the stem and remove the backing.
Step 6: Take another piece of stripped ribbon fold in half and wind around
the double-sided tape. Apply clear tape to the stem.
Repeat the process with the remainder stripped ribbons and finish off with
double-sided tape.
Step 7:
Take a strip of ribbon approximately 15cm/6〃long and strip all the way off
the end creating thin strips of ribbon.
Step 8:
Twist the shredded ribbon strip around the double-sided tape and finally secure
with clear tape.
Step 9:
Make a small cut at the base of the ribbon stem. Ensure the cut is small,
do not cut too deep and gently pull apart, do not split the ribbon too deep.
