Pehea e hana ai i ke kakaka Pua Pua Līpika Dynamic Shredder?

He aha ka lipine Shredder Flowers? And how to Create a Dynamic Ribbon Shredder flower Bow?

Step 1:
Cut three stripes of each colour of the ribbon measuring approximately
15cm/6〃 long. You can make this bow with on ribbon colour.

Step 2:
Leave approximately 2cm/1〃 on each side.
Place the first ribbon strip in between the teeth of the ribbon stripper.

Apply even force on the stripper and strip the ribbon
– do not strip the ribbon off the end.

TIP – Huki mālie i ka lipine i loko o ka lipine shredder no ka hōʻoia ʻana ʻaʻole ʻoki ʻia ka lipine.
a hiki i ka hopena.

Step 3:
E hana hou i ka like o na lipine eono.

Step 4:
E wili i ka lipine i wehe ʻia i ka hapalua a wili i ka lipine ma ke kumu. ʻO kēia makemake
hana i ka hopena pua nani.

Step 5:
E hoʻopili i ka lipine maʻemaʻe ma ke kumu o ka lipine e hana i kahi kumu ikaika.
E kau i ka lipine ʻaoʻao ʻelua a puni ke kumu a wehe i ke kua.

Step 6: E lawe i kekahi ʻāpana lipine i ʻoki ʻia i ka hapalua a e makani a puni
ka lipine ʻaoʻao ʻelua. E hoʻopili i ka lipine maʻemaʻe i ke kumu.

E hana hou i ke kaʻina hana me nā lipine i wehe ʻia a hoʻopau ʻia
lipine ʻaoʻao ʻelua.

Step 7:
E lawe i kahi lipine ma kahi o 15cm/6〃 ka lōʻihi a wehe aʻe
ka hopena e hana ana i nā lipine lahilahi.

Step 8:
Twist the shredded ribbon strip around the double-sided tape and finally secure
with clear tape.

Step 9:
Make a small cut at the base of the ribbon stem. Ensure the cut is small,
do not cut too deep and gently pull apart, do not split the ribbon too deep.